Mackie THUMP 212, Руководство пользователя

Страница: 17 / 21

Owner
’s Manual
17
Owner’s Manual
Thump Loudspeakers Specifications
Appendix B: Technical Information
Safety Features
Input Protection Peak and RMS limiting, power supply
and amplifier thermal protection
Feedback Eliminator On / Off
Display LED Rear panel signal / overload
Physical Properties
Thump212:
Height: 24.4 in / 620 mm
Width: 14.0 in / 356 mm
Depth: 14.0 in / 356 mm
Weight: 27.6 lb / 12.5 kg
Thump215:
Height: 27.4 in / 696 mm
Width: 17.3 in / 439 mm
Depth: 14.0 in / 356 mm
Weight: 32.6 lb / 14.8 kg
Mounting Methods:
Floor mount, pole mount via the built-in socket on the bottom
of the cabinet [Be sure the pole is capable of supporting
the weight of the loudspeaker].
There are no rigging points and they are NOT suitable for rigging.
Do not suspend a Thump loudspeaker by its handles.
See page 15 for more information.
Options
Thump212 Speaker Bag P/N 2047360-09
Thump212 Rolling Speaker Bag P/N 2047360-10
Thump215 Speaker Bag P/N 2047360-11
Thump215 Rolling Speaker Bag P/N 2047360-12
T100 Loudspeaker Tripod Stand P/N 2052464
SPM400 Loudspeaker Pole Mount P/N 2051055
Disclaimer
Since we are always striving to make our products better
by incorporating new and improved materials, components,
and manufacturing methods, we reserve the right to change
these specifications at any time without notice.
The “Running Man” figure is a registered trademark of LOUD
Audio, LLC.
All other brand names mentioned are trademarks or registered
trademarks of their respective holders, and are hereby
acknowledged.
©2022 LOUD Audio, LLC. All Rights Reserved.
Acoustic Performance
Frequency Range (–10 dB) 47 Hz – 23 kHz [Thump212]
40 Hz – 23 kHz [Thump215]
Frequency Range (–3 dB) 54 Hz – 20 kHz [Thump212]
47 Hz – 20 kHz [Thump215]
Horizontal Coverage Angle 90º
Vertical Coverage Angle 60º
Maximum SPL Peak 128 dB [Thump212]
129 dB [Thump215]
Monitor Angle 40˚
Transducers
Low Frequency 12 in / 305 mm [Thump212]
15 in / 381 mm [Thump215]
with ferrite
High Frequency 1.0 in / 25 mm polymer
compression driver
Power Amplifiers
System Power Amplification
Rated Power 1400 watts peak
Low Frequency Power Amplifier
Rated Power 1200 watts peak
Rated THD < 1%
Cooling Convection
Design Class D
High Frequency Power Amplifier
Rated Power 200 watts peak
Rated THD < 1%
Cooling Convection
Design Class D
Input/Output
Input Type 2x Female XLR – 1/4" Balanced
TRS combo jack
Mic/Line Impedance 10 k Balanced
1/8˝ Line Impedance 10 k Balanced
Thru Out Male XLR Balanced
Thru Out Impedance 300 Balanced
Electronic Crossover
Crossover Frequency 2.1 kHz
Line Input Power
Detachable line cord 100–240V~, 50–60 Hz, 75W
AC Connector 3-pin IEC 250 VAC, 10 A male
Power Supply Type Switchmode