Owner
’s Manual
9
Owner’s Manual
Stereo Speakers with Minimum Length of Speaker Cable Runs
Hookup Diagrams continued...
This last hookup diagram probably won’t be utilized a whole lot, but it is an option.
In this example, cables from the mixer’s left and right main output jacks are connected to the ch. 1 and ch. 2 input jacks
of the MX Series amplifier. This time, though, only a single speaker output of the MX amp is connected to the input
of a single passive loudspeaker [Mackie DRM212-P in this example]. The output (or thru) jack of the passive loudspeaker
is then connected to the input of another passive loudspeaker. This type of setup would be good for loudspeakers used
as monitors, for example. Make sure that the amp mode is set to “stereo”.
48V
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
Stereo
Ch. 1
Ch. 2
CH.1 COLD
CH.2 COLD
AMPLIFIER
END
SPEAKER
END
CH.1 HOT
CH.2 HOT
1+
1–
2–
2+
1+
1–
2–
2+
