MX S
eries P
rofes
sional P
ow
er Amplifiers
8
MX Series Professional Power Amplifiers
Hookup Diagrams continued...
Daisy-Chaining Two Amplifiers
This setup starts off looking like the first hookup diagram – Stereo Setup – then gets a little fancy.
Like before, cables from the mixer’s left and right main output jacks are connected to the ch. 1 and ch. 2 input
jacks of the MX Series amplifier. The speaker outputs of this MX amp are then connected to the inputs of a pair
of passive loudspeakers [Mackie DRM212-P in this example].
The XLR thru jacks of the first MX amp are then connected to the ch. 1 and ch. 2 input jacks of a second MX amp with the
speaker outputs of this MX amp connected to the inputs of a pair of passive subwoofers [Mackie DRM18S-P in this example].
Make sure that the amp mode on both amps is set to “stereo”.
48V
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
Stereo
Stereo
