MX S
eries P
rofes
sional P
ow
er Amplifiers
16
MX Series Professional Power Amplifiers
MX Series Amplifiers Specifications
Appendix B: Technical Information
Input/Output
Input Type:
Female XLR Balanced
XLR Impedance:
20 k balanced
10 k unbalanced
Output Type:
Speakon®
Male XLR Balanced [Thru]
Speakon Out Impedance:
600 balanced
XLR Thru Out Impedance:
600 balanced
Line Input Power
Detachable line cord
MX2500:
~230–240VAC, 50–60 Hz, 500W @ 8
Ω
MX3500:
~230–240VAC, 50–60 Hz, 1000W @ 8
Ω
AC Connector:
3-pin IEC 250 VAC, 10 A male
Safety Features
Input Protection:
Peak and RMS limiting, power
supply and amplifier thermal protection
Cooling:
Variable-speed fans with back-to-front airflow
Channel Display LEDs:
Power, Signal, Clipping, Fault
Physical Properties
MX2500:
Height:
3.5 in / 88 mm
Width:
19.0 in / 483 mm
Depth:
11.9 in / 303 mm
Weight:
30.4 lb / 13.8 kg
MX3500:
Height:
3.5 in / 88 mm
Width:
19.0 in / 483 mm
Depth:
14.6 in / 370 mm
Weight:
40.3 lb / 18.3 kg
Disclaimer
Since we are always striving to make our products better
by incorporating new and improved materials, components,
and manufacturing methods, we reserve the right to change
these specifications at any time without notice.
The “Running Man” figure is a registered trademark of LOUD
Audio, LLC.
All other brand names mentioned are trademarks or registered
trademarks of their respective holders, and are hereby
acknowledged.
©2019 LOUD Audio, LLC.
All Rights Reserved.
Continuous Sine Wave Average Output Power,
per channel, both channels driven, 20 Hz to 20 kHz
MX2500:
8
Ω
Bridged Power:
1500 W
8
Ω
Dual Power:
500 W
4
Ω
Dual Power:
750 W
MX3500:
8
Ω
Bridged Power:
2700 W
8
Ω
Dual Power:
1000 W
4
Ω
Dual Power:
1350 W
Frequency Response
@1 W:
20 Hz – 20 kHz (+0, –1 dB)
Distortion (THD)
20 Hz – 20 kHz:
<0.5%
Signal-to-Noise Ratio (20 Hz – 20 kHz)
MX2500:
>104 dB below rated power,
A-weighted
MX3500:
>105 dB below rated power,
A-weighted
Damping Factor
>200 @ 10 Hz to 400 Hz into 8
Ω
Slew Rate
>10V/us
Input Gain
MX2500:
33 dB
MX3500:
37
dB
