Rigging Notes
A minimum of two rigging points must be used to
hang an HDA. More may be used for creating the desired
hanging angle as shown in the illustrations below.
The illustrations provided below is just one rigging
possibility. Refer to the hookup diagrams to view
additional rigging suggestions.
20˚
See ‘A note
on eyebolts’,
page 18
20˚
20˚
20˚
110˚
IMPORTANT INSTALLATION WARNING
Installation should only be done by experienced, licensed professionals. Improper installation may result in damage
to the equipment, injury or death. As described throughout this manual, make sure the loudspeakers are installed
in a stable and secure way in order to avoid any conditions that may be dangerous for persons or structures.
WARNING: When the FB121 Flybar is used
to suspend a system, it cannot retain a 10:1
design factor at certain pick points. In some
situations, suspended and installed arrays may be
confi gured with other design factors (e.g. 8:1 or 5:1),
Loud Technologies Inc only recommends using the
desired 10:1 design factor. Please refer to the table on
page 17 for the recommended setup for your system and
Appendix A on page 22 to review and run the
Resolution software. This predictive software is an
invaluable tool in determining safety issues, weights
and angles involved, coverage and much more.
19
Owner’s Manual
Owner’
s Manual