background image

DLM12S P

o

w

er

ed Sub

w

oof

er

14

DLM12S Powered Subwoofer

Placement

The DLM12S subwoofer is designed to sit on the   

floor or stage. It is not designed to be pole-mounted 

 

or suspended.

When pole-mounting loudspeakers, be sure that the 

DLM12S subwoofers are stabilized and secured from 
falling over or being accidentally pushed over. For 
stacked scenarios, it is highly suggested that straps are 
utilized. Failure to follow these precautions may result 
in damage to the equipment, personal injury, or death.

The cabinet has no rigging points and is  
not suitable for rigging. NEVER attempt to  
suspend a DLM12S subwoofer by its handles.

As with any powered components, protect them from 

moisture and extreme cold and follow the other Care 
and Maintenance suggestions below.

The Ins and Outs of Polarity

The Mackie DLM12S subwoofer includes a switch  

that allows you to quickly invert the polarity of the 

 

subwoofer’s output relative to the input signal it is  
receiving from the mixer or other sound source.    
But what exactly does that mean? A subwoofer works  
by literally pumping air as the woofer cone moves in 

 

and out with respect to the cabinet in which it is 
housed. It does so according to the low-frequency 

 

portion of the signal it receives from the sound source.

The woofer cone is simply following the waveform as 

seen in the sine wave in Figure 1. As the sine wave rises, 
the woofer cone pushes out. Likewise, as the sine wave 
falls, the woofer cone pulls into the cabinet. A musical 
signal is much more complex, of course, but the same 
principle applies. Movement of the woofer cone causes 
air pressure changes that we perceive as sound.

When the normal/invert [polarity] switch [5] is 

engaged, the original waveform is simply reversed 180˚ 
[see Figure 2]. Again, the subwoofer cone follows the 
waveform. However, this time the woofer cone starts 
by pulling into the cabinet followed by the woofer cone 
pushing out. If you have ever experimented with a 
subwoofer polarity switch, you may not have noticed  
any changes to the sound regardless of its position, 
especially if you are listening to just the subwoofer. 

 

This is normal, as our ears perceive them both at the 
same time. 

The normal/invert [polarity] switch comes into    

play when the DLM12S subwoofer is paired with a  
loudspeaker. Ideally, the woofer cones of the subwoofer 
and full range loudspeaker would work together by 
pushing and pulling in unison. DLM12S subwoofers are 
designed to be used in a broad range of applications. 
The flexibility provided by the polarity switch is    
necessary to ensure that you are receiving the best   
possible sound from your system, regardless of your 
setup.

Care and Maintenance

Your Mackie subwoofers will provide many years of 

reliable service if you follow these guidelines:

•  Avoid exposing the subwoofers to moisture.  

If they are set up outdoors, be sure they are 
under cover if rain is expected.

•  Avoid exposure to extreme cold (below  

freezing temperatures). If you must operate  
the subwoofers in a cold environment, warm 
up the voice coils slowly by sending a low-level 
signal through them for about 15 minutes prior 
to high-power operation.

•  Use a dry cloth to clean the cabinets. Only do 

this when the power is turned off. Avoid getting 
moisture into any of the openings of the 

 

cabinet, particularly where the drivers are 
located.

<–– Time ––>

Figure 1: Normal [0˚]

Amplitude

Amplitude

Figure 2: Invert [180˚]

<–– Time ––>

Polarity Waveforms

Содержание DLM12S























Отзывы: