Quick Start Guide
Quick Star
t Guide
5
5. Fire Up the DL1608 and Launch
the Master Fader App:
Step fi ve is
the reward for following the four
previous steps. It’s time to turn on
the mixer, but whispering “sweet
nothings” to it won’t help. Instead,
you will need to press the top
edge of the Power switch to fi re it
up [Figure A]. The Power LED will
illuminate green when engaged.
Now launch the Master Fader app
to get it started. Go ahead and tap
that app!
At this point, you will likely be
prompted to update the fi rmware.
Do so by following the on-screen
instructions before continuing.
Five Simple Steps
After updating, the Mixer View
[Figure D] will be shown and at
this point you will want to verify
connectivity. This is easy to do,
as there are only two possibilities:
connected or offl ine.
Figure D – Mixer View: Connected
Figure E below shows an iPad
that is currently offl ine. In other
words, not connected to the DL1608.
So if your app looks like
Figure D, you are cool as
a cucumber, ready to rock...or
jazz...or country...or whatever else
it is that you do at times like these.
In the unusual instance that
“OFFLINE” is displayed, please
follow the directions again, step-
by-step, and also check out the
Troubleshooting section in the
DL1608 Reference Guide.
If “OFFLINE” still remains, please
contact our splendid Technical
Support heroes. See page 30 for
contact information.
Figure E – Mixer View: Offl ine
