background image

19

Owner’s Manual

Owner’

s Manual

Repair

For warranty repair or replacement, refer to the war-

ranty information on page 31.

Non-warranty repair for Mackie products is available 

at a factory-authorized service center. To locate your 
nearest service center, visit www.mackie.com, click 
“Support” and select “Locate a Service Center.” Service 
for Mackie products living outside the United States can 
be obtained through local dealers or distributors.

If you do not have access to our website, you can 

call our Tech Support department at 1-800-898-3211, 
Monday-Friday, 7 am to 5 pm Pacific Time, to explain the 
problem. Tech Support will tell you where the nearest 
factory-authorized service center is located in your area.

Recording to FireWire

•  If you are recording vinyl music to your computer, 

and the level seems low, record using the FireWire 
outputs (5, 6, 7, 8) that come after the EQ section. 
This will give you the chance to boost the levels a 
tad with the level controls [25]. Set the source se-
lect switch [26] to line/phono, and the line/phono 
switch [4] to phono.

•  If you are using timecode vinyl or timecode CD, 

then use the Firewire outputs (1, 2, 3, 4) that come 
directly after the phono section. In this way, you 
can have the timecode flowing to your computer, 
and use the source selector switch to play the com-
puter output in that same program channel. 

Need help with your new d.2 Pro DJ Mixer?

•  Visit www.mackie.com and click Support to find:   

FAQs, manuals, addendums, and user forums. 

•  Email us at: [email protected].
•  Telephone 1-800-898-3211 to speak with one of our splendid 

technical support representatives, (Monday through Friday, 

from 7 a.m. to 5 p.m. PST).

Correct Disposal of this product:

 

This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE Directive 

(2002/96/EC) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling 

of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the 

same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste 

equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service.

Содержание DJ Mixer

































Отзывы: