background image

22

d.2 DJ Mixer

d.2 2-channel DJ Mix

er

AC Power Requirements:

Power Consumption:  

 

20 watts

Universal AC Power Supply: 

100 VAC – 240 VAC,  

 

 

 

 

50-60 Hz

Physical Dimensions and Weight:

Height:   15.49”/393.4 mm (including knobs and connectors)

Width:   10"/254 mm

Depth:   4.62”/ 117.3 mm (including knobs and connectors) 

Weight:  11 lb/5 kg (with FireWire card)

The d.2 mounting slots are compatible with the Odyssey Battle 
Bridge. This consists of two L brackets which bolt to the d.2 
and allow you to fi t it securely between two turntable cases. 
See www.odysseygear.com for more details.

Options

d.2 FireWire Interface Card

LOUD Technologies Inc. is always striving to improve our prod-
ucts by incorporating new and improved materials, components, 
and manufacturing methods. Therefore, we reserve the right to 
change these specifi cations at any time without notice.

“Mackie,” and the “Running Man” are registered trademarks of 
LOUD Technologies Inc. All other brand names mentioned are 
trademarks or registered trademarks of their respective hold-
ers, and are hereby acknowledged.

©2005 LOUD Technologies Inc. All Rights Reserved.

WEIGHT

11 lb 
5 kg

10.00"

254 mm

14.79"

375.7 mm

15.49"

393.4 mm

3.59"

91.2 mm

4.62"

117.3 mm

9.06"

230.1 mm

0.28"

7.1 mm

7.1"

180.3 mm

4.42"

112.3 mm

Содержание D.2





























Отзывы: