the OFF position. While holding down the enable button (see Figure 9, 1), rotate the hand wheel (2, also called the MPG)
and the selected axis will move. Change axes by switching the Axis Selector to a different axis. The speed can be
adjusted using the Jog Selector (4).
Figure 9 - Axis Selector
The Jog Selector on the pendant switches between either 0.0001 or 0.001 unit increments. Each click of the MPG will
move the selected increment. However, if the Jog Selector is on V then the MPG is in velocity mode. In velocity mode
the axis moves as long as the MPG is turning and the speed of the axis is regulated by the speed of the hand wheel. In
other words, turning the hand wheel very fast will make the axis move very quickly.
Figure 10 - Jog Selector
When the pendant is not in use, make sure to turn the Axis Selector to OFF. Otherwise the operator panel jog
functionality will be disabled.
2.3 Mouse
Below the operator panel is a ball mouse. Use this for navigating around on the control.
Figure 11 - Mouse
2.4 Keyboard
The keyboard is located at the bottom of the control in a flip-out tray. For security and safety reasons there is a lock
hole in the back left hand side of the keyboard tray to prevent the tray from opening. The lock is not supplied with the
control.
Figure 12 - Keyboard
2.5 External USB Port
On the right side of the keyboard there is a USB port. Use this for transferring programs, files, or any other data to and
