SW4000 USER’S MANUAL
VER5.13 65
Note: press
0
to disable edge
detects.
4. Press
ENTER
to confirm your selection and exit.
7.18
Toggle between Linear Scale and Rotary Encoder
Both linear scale and rotary encoder can be installed in any axis. The linear scale is used to measure
distance; the rotary encoder is used to measure angle.
Default: linear scale.
Set rotary encoder in Z axis.
STEPS:
1. Enter “SETUP” and press
or
until the message
window displays “AXIS.TYPE”;
2. Press
ENTER
:
X, Y, Z window displays the former type.
“LINEA” means linear scale.
“ENCODE” means rotary encoder.
Message window displays “SEL AXIS”, which means the next
step is to select axis.
3. Set Z axis are installed with rotary
Press
Z
until display in Z window is “ENCODE”;
Note: Press
X
to change X axis;
Press
Y
to change Y axis;
Press
Z
to change in Z axis;
4. Press
ENTER
to confirm your new set and exit.
Press
AC
to cancel your new set and exit.
7.19
Step Mode of ARC
In ARC function, if the plane is not XY, you can setup the step mode. There are two modes. Mode 0 is Z
STEP mode and Mode 1 is MAX CUT mode.
Default setting: Z STEP.
