SW4000 USER’S MANUAL
VER5.13 19
Press
,
3. Set the point F as the datum of SDM 001.
In SDM 001 and align the lathe tool with point F,
then zero X axis, Y axis. DRO displays as the right:
Press
,
4. Set the point G as the origin of SDM 002.
In SDM 002, align the lathe tool with point G, and
zero X axis, Y axis. DRO displays as the right.
Press
,
5. Set the point H as the origin of SDM 003.
In SDM 003, align the lathe tool with point H, and
zero X axis, Y axis. DRO displays as the right.
Press
,
;
6. Machine the work-piece according to the preset SDM coordinate;
7. Machine another work-piece according to the same blueprint. You only need set the center point
as the datum of ABS. It is not necessary to set SDM coordinate again, as SDM can be set
automatically. Point E, F, G, and H is the zero point of SDM 000, SDM 001, SDM 002, and SDM
F
G
H
E
