4
OPERATION MANUAL
GENERAL MACHINE SHOP SAFETY WARNINGS AND PRECAUTIONS
When using this tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage. Read all instructions before using this tool !
1. Keep the work area clean.
Cluttered areas invite injuries.
2. Observe work area conditions.
Do not use machines or power tools in damp or wet
locations. Do Not expose to rain. Keep work area well lite. Do not use electrically powered
tools in the presence of flammable gases or liquids.
3. Keep children away.
Children must never be allowed in the work area. Do not let them
handle machines, tools, or extension cords.
4. Store idle equipment.
When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
5. Do not force tool.
It will do the job better and more safely at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool capacity.
6. Use the right tool for the job
. Do not attempt to force a small tool or attachment to do the
work of a larger industrial tool. Do not modify this tool and do not use this tool for a
purpose for which it was not intended.
7. Dress properly.
Do not wear loose clothing or jewelry as they can be caught in moving
parts. Protective, electrically non-conductive clothes and non-skid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
8. Use eye and ear protection.
Always wear ANSI approved impact safety goggles. Wear
a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved
dust mask or respirator when working around metal, wood, and chemical dusts and mists.
9. Do not overreach.
Keep proper footing and balance at all times. Do not reach over or
across running machines. Keep hands and fingers clear of the Rolls when operating.
10. Maintain tools with care.
Keep tools sharp and clean for better and safer performance.
Follow instructions for lubricating and changing accessories. Inspect tool cords periodically
and, if damaged, have them repaired by an authorized technician. The handle must be kept
clean, dry, and free from oil and grease at all times.
11. Remove adjusting keys and wrenches
. Check that keys and adjusting wrenches are
removed from the tool or machine work surface before operating.
12. Stay alert.
Watch what you are doing, use common sense. Do not operate any tool when
you are tired.
13. Check for damaged parts.
Before using any tool, any part that appears damaged should
be carefully checked to determine that it will operate properly and perform its intended
function. Check for alignment and binding of moving parts; any broken parts or mounting
fixtures; and any other condition that may affect proper operation. Any part that is
damaged should be properly repaired or replaced by a qualified technician. Do not use the
tool if any switch does not turn on and off properly.
14. Replacement parts and accessories.
When servicing, use only identical replacement parts.
Use of any other parts will void the warranty. Only use accessories intended for use with this
tool.
Содержание Hafco Metalmaster S267
Страница 10: ...10 OPERATION MANUAL SPARE PARTS DIAGRAM...
