MachineryHouse CL-40A, Инструкция по эксплуатации

Страница: 23 / 93

22
4-9 Auto Feed Operation
1) Shift Forward/Reverse Change Lever (4) on Headstock to decided the direction of
feeding.
2) Select proper Feed Speed by shifting Gear Box Feed Change Lever.
3) Push down Half Nut Engaged Lever (18) to proceed threading.
4) Push down Longitudinal Feed Select Lever (19) when it needs to feed the
tools crosswise.
5) Pull up Cross Feed Select Lever (19) when it needs to feed longitudinally.
4-10 Auto Feed Stop Operation
The machine is equipped with Auto Stop Feed in Apron. Screw up the screw on
Eccentric Centering Ring (12) and settle in appropriate position. Note that the highest
point of Eccentric Centering Ring have to be outward, and no mater it feed forward or
backward, you can both set the Eccentric Centering Ring in required position. Test
once before beginning to process in preventing to process in preventing unnecessary
damage or danger.
4-11 Four Position Auto Feed Stop Operation
If it requires processing the object to a certain length or object with steps, you may
use this utility to complete a multi-section cutting.
1) Place Eccentric Centering ring (12) to any require position, the highest point
indicates outward. Then fix it. Now you can try to operate Auto Feed of Apron to
make sure precisely position by adjusting Eccentric Centering Ring.
2) Secondly, turn Auto Centering Lever to second point. Fix second Eccentric
Centering Ring as per above method.
3) Same way to fix the third, the fourth.
4) While Apron is auto feeding forward, only the one Eccentric Centering Ring which
4 - 10
Page 23 Instructions Manual for CL-40A (L600) 01/09/2017