MachineryHouse CL-40A, Инструкция по эксплуатации

Страница: 21 / 93

20
4-4 “INTERMITTENT” Operation of Main Spindle
For the convenient way of
changing Main Spindle
Speed, confirming Feed
Speed and Centering objects,
the machine equipped with
“INTERMITTANT” button
(9) located in the right side
of Gear Box. Push it down,
Main Spindle will
immediately rotate forward;
and if to release the button, it
stops. Note that the intermittent function cannot rotate reversely.
4-5 The Importance and Methods of Spindle Leveling Adjustment
1) Switch on to make the Spindle turn while the Spindle is set up at 1330 r.p.m. By
putting the palm of the left hand on the Headstock cover to fell its chat ter. An
unlevelling Spindle will lead to lathe chatter. Move Leveling Block (either “A” or “B”)
left or right to adjust until your left hand feels the minimum chatter.
2) Afterwards, change the Spindle speed to 2000 r.p.m. or 900 r.p.m. and check the
Leveling with the same way as we did at 1330 r.p.m. by adjusting the Leveling Block
“A” or “B”.
4 - 4
4 - 5
Page 21 Instructions Manual for CL-40A (L600) 01/09/2017