MachineryHouse BS-5V, Инструкция по эксплуатации

Страница: 5 / 17

4
OPERATION MANUAL
1. ALWAYS DISCONECT FROM POWER. Always remove the plug from the wall socket
before any adjustments, maintenance, or blade changes are made.
2. REMOVE ADJUSTING KEYS AND WRENCHES. Form a habit of checking to see that keys
and adjusting tools are removed from tool before turning it on.
3. KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
4. DON’T USE IN DANGEROUS ENVIRONMENT. Don’t use power tools in
damp or wet locations, or expose them to rain. Keep the work area well lit
5. KEEP CHILDREN AWAY. All visitors should be kept a safe distance from work area.
6. MAKE WORKSHOP KID PROOF with padlocks, master switches, or by removing starter
keys.
7. DON’T FORCE TOOL It will do the job better and safer at the rate for which it was
designed.
8. USE RIGHT TOOL do not force the tool or attachment to do a job for which it was not
designed.
9. USE PROPER EXTENSION LEAD. Make sure your extension lead is in good condition.
When using an extension lead, be sure to use one heavy enough to carry the current
your machine will draw. An undersized cord will cause a drop in line voltage resulting
in loss of power and overheating. The correct size to use depends on the extension lead
length and the ampere rating, which should be greater than the amperage found on the
tool nameplate. If in doubt, use the next heavier lead
10. WEAR PROPER APPAREL do not wear loose clothing, gloves, neckties, rings, bracelet or
other jewelry. Contain long hair. which may get caught in moving parts. Non-slip foot
wear is recommended. Wear protective hair covering
11. ALWAYS USE SAFETY GLASSES AND EAR PROTECTION. Also use face or dust mask if
cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses, they
are NOT safety glasses.
12. SECURE WORK. Use clamps or a vice to hold work when practical. It’s safer than using
your hand and it frees both hands to operate tool.
13. DON’T OVERREACH. Keep proper footing and balance at all times.
14. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest
performance. Follow instructions for lubricating and changing accessories.
15. DISCONNECT TOOLS before any servicing; or when changing accessories, such as
blades, bits, cutters, etc
16. REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure the switch is in the off
position
17. USE RECOMMENDED ACCESSORIES. Consult the owner’s manual for recommended
accessories. The use of incorrect accessories may cause risk of injury to persons..
18. NEVER STAND ON TOOL Serious injury, could occur if the tool is tipped or if the cutting
tool is unintentionally contacted.
19. NEVER USE BLADES WHICH ARE DAMAGED OR DEFORMED.
20. NEVER CLEAN THE SAW BLADE WHILST IT IS IN MOTION
SAFETY RULES
Page 5 Instructions Manual for BS-5V (B004) 06/07/2017