15
MACH-3 Installation and Configuration Manual
Simplifying IoT from edge to enterprise
3.3.2 Wi-Fi Access Point
In the Access Point mode, the following configuration panel is seen.
•
Set the ‘Enable’ button to use the Wi-Fi in the access point mode
•
SSID – Specify the wireless network name or SSID (Service Set Identifier) used to identify
the WLAN
•
Set the ‘Broadcast SSID’ button if you want the SSID to be visible
•
Enter the WPA2 passphrase
•
Set the ‘Mode’ to DHCP SERVER or BRIDGE
•
Enter IP address
•
Enter Netmask value
•
Enter the DHCP range of values
•
Set ‘Allow Ping’ if you want the AP to be ping-enabled
3 Gateway Configuration
