Mach M20.06, Руководство пользователя

Страница: 21 / 28

Operation 21
W i d t h ( B E L L o n l y )
Pushing the Parameter UP key widens the EQ (lower Q), pushing the
DOWN key makes the EQ narrower (higher Q). EQ Width is available
between 0.05 and 3 Octaves, in 0.05 increments.
S T O R E A N D R E C A L L
Storing and Recalling a program can be done at any time using the STORE
and RECALL keys on the left hand side of the LCD. The M20.06 can hold
60 programs inter nally. To reset a unit to default values, use the
configuration parameter in the
Utilities screen.
If the unit is prompting for confirmation of an action at any time, the STORE
key is used to conform the action, and pressing it at this point will not access
the
STORE facility.
S t o r i n g
Pressing the STORE key will access the Store screen.
Use the RIGHT / LEFT keys (or push the Parameter UP / DOWN keys) to
move along the program name.
While the Program number is highlighted, pushing the Parameter
UP / DOWN keys will cycle through programs 1-60.
Whilst each of the letters in the Program name are highlighted, pushing the
Parameter
UP / DOWN keys will cycle through all available characters.
The last space in the program name is reserved for Program lock. Pushing
the Parameter
UP / DOWN keys will turn this on/off. If a program has this flag
set to on (so the program name displays a key at the right hand side), a new
program, or edited version of the current program, cannot later be stored in
this location. This lock can be turned off at any time in order to delete or
overwrite the program. If you try to store a program in place of a locked
program, the unit will display
PROGRAM LOCKED! , but will then highlight
the key icon,
Which gives you the option of turning off the lock if you wish to overwrite the
existing program.
Note that the edit flag * appears when there are unsaved changes to a
program, compared to the initial status of the last recalled/stored program.
When a program is stored to internal memory, the edit flag will disappear.
Once the program name has been entered, and the Program lock status
cleared, pressing the
STORE key again will prompt the message STORE