Mach Power WL-CPE2G24-065, Руководство пользователя

Страница: 32 / 36

32
Wireless AP can’t
connect with AP
(the status display
unconnected)
Try to scan the avaliable wireless networking
again;
Make sure the Wireless AP’s wireless standard
(11b/g/n, 2.4G) is correct;
The Security and passwords are matched
between Wireless AP and AP;
The signal strength of AP is too weak to con-
nect, should be more than -75dBm;
Can’t scan the
wireless AP
Scan it several times more;
Make sure there are 2.4G signal existed.
Reset the Wireless AP, scan it again after
Wireless AP restart;
The connection of
Wireless AP and
AP is success, but
the computer can’t
share internet Pls Check the computer’s IP address and DNS
setting. If it is dynamin, set the network card
as automatically obtain. If it is static IP, pls
contact with ISP for correct IP address and
DNS address.
How to Reset
Wireless AP
Press the “Reset” button more than 15
seconds after power on. The Wireless AP will
restore factory default after the Wireless AP
restart.