9
2.7
Printing the Test Files
Click on the SD card icon, chose a gcode file which you want to print. Click on print icon, the machine will automatically start to print.
，When printing bottom layer, Observe the print nozzle. If the material can not pasted on the hotbed, you need to Adjusting nut coun-
ter clockwise. If the tape was broken, you need to Adjust the nut clockwise.
CHAPTER3
PRINTING OPERATION
3.1
Display Panel
The main user interface of the printer is a display panel.
1
Install filament
4
Printing
2
Application
5
Temperature Display
3
System
6
SD card condition
3.2
Display Panel HOME Overview
3.2.1
Install filament
Preset Head temperature，use to set up the nozzle temperature, as for the different materials need to set up the different temperatu-
re. For example, ABS is set to 225°C, PLA is set to 205°C.
