14
CHAPTER8
TROUBLE REMOVAL
Without power
1.
Verify whether the power cord is firmly inserted.
2.
Turn on the power switch, whether the power switch is on or not.
3.
Verify whether the AC wall socket is provided or not.
Not extruded material
Materials may be stuck in the nozzle, please refer to 500 hours maintenance.
Belt Movement Caton
Please check the lubricating condition, wipe oil on the optical axis and evenly lubricate
again. Another possibly reason is rack affected by external force during transport
SD card read abnormally
SD card damaged; SD card slot damaged; SD card inserted deep insufficient; the slots
line is loose.
Nozzle can not heat
Heating tube is not connected; heating tube damage; temperature control tube damaged;
power tube damaged;
CHAPTER9
SUPPORT
• Products from PRISMA by MachPower® make use of the legal warranty offered by the reseller. Returns are only possible in case of
integrity items, that is, not assembled, lit or used.
• The information in this manual is subject to change at any time without prior notice.
• All information and contents contained in this manual are copyrighted.
•To the extent permitted by applicable law, hereby MachPower® and all its employees or affiliates declare any and all liability, da-
mages and risks arising from death or personal injury due to the assembly or operation of our products. In addition, MachPower®
or any of its officers, executives or affiliates, nor any party involved in the production or creation of our products will in any case be
held liable to you or any person for any special, direct or indirect, incidental, Or consequential resulting from the use or impossibility
of using this manual
