10
1
Temperature monitoring curve
5
Extruder Head “T0”
2
Manually enter the temperature
6
Extrusion
3
Turn on or off the heating
7
Return Back
4
Material retraction ( Be careful)
*Only if the nozzle is heated to preset temperature can you extrude the material. Using retraction may cause nozzle clogged.
3.2.2
Value input
1.
Such as input Printer Head and Heating Bed Temperature degree value, pls write and confirm”OK”
3.2.3
Application
Pre-heating build plate ,Manual, Auto manual, update, Fan and Return.
•
Auto calibrating:
Without installation
•
Update:
Update the display. Before updating, pls ensure have insert SD card in case failure.
•
Cooling fan PWM speed adjust:
When click this button, it will appear value input interface, PWM (1-255). ‘255” is the fan fastest
speed
•
Pre-heating build plate:
The operation is the same as the head preheat, ABS is set to 80-110°C, PLA is set to 50°C).
•
Manual:
Click into “Manual” adjustment interface.
