![background image](http://html1.mh-extra.com/html/macdon/r216/r216_installation-instructions-manual_3197602004.webp)
Summary of Changes
At MacDon, we
’
re continuously making improvements, and occasionally these improvements affect product
documentation. The following list provides an account of major changes from the previous version of this document.
Section
Summary of Change
Internal Use
Only
OVERALL
Cutterbar kit MD #307756 superseded by MD #338109.
Kit instruction MD #214859 replaced by MD #215339.
ECN 60170
3.1 Opening Cutterbar Curtain,
Changed image to better show engagement of header safety prop
and be consistent with operator
’
s and technical manuals. Updated
illustration from 1030015 to 1029808 to show change.
Tech Pubs
3.2 Removing Left Driveline, page
Updated Step 1 to remove four M10 hex flange head bolts instead
of two. Updated illustration from 1028233 to 1033148 to show
change.
Engineering
Updated Step 1 to remove four M10 hex flange head bolts instead
of two. Updated illustration from 1028513 to 1033149 to show
change.
Engineering
3.6 Installing Cutterbar, page 15
Added information with the differences to model year 2019 and
2020. Removed illustration 1031508 and replaced with
illustrations 1032908, 1032904, and 1032905 to clarify.
Tech Pubs
3.7 Installing Left Driveline, page
Updated Step 7 to install four M10 hex flange head bolts instead
of two. Updated illustration from 1028233 to 1033148 to show
change.
Engineering
3.8 Installing Right Driveline,
Updated Step 7 to install four M10 hex flange head bolts instead
of two. Updated illustration from 1028513 to 1033149 to show
change.
Engineering
3.9 Closing Cutterbar Curtain,
Changed image to better show disengagement of header safety
prop and be consistent with operator
’
s and technical manuals.
Updated illustration from 1030015 to 1029799 to show change.
Tech Pubs
215339
ii
Revision A