215339
20
Revision A
3.7
Installing Left Driveline
WARNING
Exercise caution when working around the blades. Blades are sharp and can cause serious injury. Wear gloves when
handling blades.
1028512
B
A
C
D
Figure 3.30: Drum and Tube Shield
–
Cutaway View
1.
Apply anti-seize compound on splined shaft (A).
2.
Insert driveline (B) at an angle and guide it past hub
drive (C) and drum (D).
3.
Insert splined spindle end (A) into the splined bore of
driveline (B).
1028502
A
A
B
C
Figure 3.31: Driveline
4.
Place a bead of high-strength threadlocker (Loctite
®
262 or
equivalent) around the threads of four M12 hex flange
head bolts (A). Use the bolts to secure driveline
assembly (B) to hub drive (C). Torque bolts to 100 Nm
(74 lbf·ft).
1028510
A
B
Figure 3.32: Driveline Shield
5.
Position driveline shield (B) as shown. Apply a bead of
medium-strength threadlocker (Loctite
®
243 or equivalent)
around the threads of two M10 hex flange head bolts (A).
Use bolts (A) to secure driveline shield (B) in place.
