![background image](http://html1.mh-extra.com/html/macdon/r216/r216_installation-instructions-manual_3197602003.webp)
Introduction
The Cutterbar kit (MD #338109) is used to replace the cutterbar on a MacDon R216 Rotary Disc Header. This document
explains how to install the kit. A list of parts included in the kit is provided in Chapter
Installation time
Installation of this kit will take approximately 6 hours.
Conventions
The following conventions are used in this document:
•
Right and left are determined from the operator
’
s position. The front of the rotary disc header is the side that faces
the crop.
•
Unless otherwise noted, use the standard torque values provided in the rotary disc header operator
’
s manual and
technical manual.
NOTE:
Keep your MacDon publications up-to-date. The most current version of this instruction can be downloaded from our
Dealer-only site (
) (login required).
NOTE:
This document is currently available in English only.
215339
i
Revision A