![background image](http://html1.mh-extra.com/html/macdon/m205/m205_installation-instructions-manual_3218514021.webp)
3.2
Wheel Drive Motor Servo Hardware (2014 and Prior Only)
Along with the parts required to replace the cooler bypass manifold, the kit also includes 16 hex socket head
screws. These are needed to replace the hardware on both wheel drive motor servos on windrowers from model
years 2014 and earlier. Follow the remaining procedures twice: once for the right-hand wheel drive and once for
the left-hand wheel drive.
NOTE:
These procedures are NOT required for model year 2015 and later windrowers. The motors on these windrowers
already have the required hardware.
3.2.1
Removing Drive Wheels
To remove the drive wheels, follow these steps:
CAUTION
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator’s seat for any reason.
1.
Place ground speed lever (GSL) in N-DETENT (A),
shut down engine, and remove key.
Figure 3.14: Ground Speed Lever
CAUTION
Jack stand must be capable of supporting a minimum
of 2268 kg (5000 lb.).
2.
Place a jack under the leg jack point (A), and raise the
drive wheel until it is slightly off ground. Place a jack
stand beneath the lift cylinder mount (B).
NOTE:
Do
NOT
place jack stand under the cylinder. Use a
small metal plate on top of the jack stand.
3.
Lower the windrower onto the jack stand.
Figure 3.15: Drive Wheel Jack Point
147611
15
Revision B
Содержание M205
