MacDon M205, Руководство по установке

Страница: 15 / 30

3 Installation Instructions
To install the Oil Cooler Bypass kit (MD #183519), follow these procedures in order.
IMPORTANT:
DO NOT attempt to install the Oil Cooler Bypass kit in the field. Install the kit in a clean environment; the hydraulic
hose and fittings must be kept clean during installation to avoid hydraulic system damage.
IMPORTANT:
Protect the ends of hoses, fittings, and ports from contamination with clean, lint-free towels or clean plastic bags.
3.1 Cooler Bypass Manifold
3.1.1 Preparing Kit Components for Installation
To prepare the cooler bypass manifold components for installation, follow these steps:
1. As shown in the illustration at right, attach the two test
port fittings (MD #134437) (A) to ports CRG and CPG
on the new cooler bypass manifold (MD #183494) (B).
All parts are provided in the kit.
2. Attach the adapter fitting (MD #21031) (C) provided in
the kit to port DR on the manifold.
Figure 3.1: New Cooler Bypass Manifold with
Fittings
3.1.2 Changing the Hydraulic Oil
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
To drain hydraulic oil, follow these steps:
147611
9
Revision B