6. Start up and operate the windrower for a few minutes,
then stop and check the oil level.
Refer to
Checking Wheel Drive Lubricant Level, page 284
. If
necessary, add more oil.
5.9.5 Inspecting Exhaust System
The system consists of two main canisters for exhaust treatment. Between the two exhaust canisters is a tube with
a dosing module (DM) for diesel exhaust
fl
uid (DEF).
CAUTION
Engine exhaust stack may be hot. To avoid burns, do NOT touch exhaust canister when engine is running.
Allow suf
fi
cient cooling time after shut-down.
The exhaust system requires no regular maintenance, but it should be inspected periodically as follows:
1. Open the hood. Refer to
.
IMPORTANT:
Ensure the exhaust system is secure to eliminate vibration.
2. Check the following:
a. Exhaust canisters (A) and bellow tube (B) for
dents, cracks, and wear
b. Straps (C) for tightness
c. U-bolt (D) and band clamps (E) for breakage,
cracks, and rust
IMPORTANT:
Damaged exhaust piping, clamps or components
can lead to exhaust leaks and engine derate.
Figure 5.81: Exhaust System
214053
286
Revision A
Содержание M1240
