215922
218
Revision A
4.7.7
Knife Speed
The ideal cutting speed of the knife should achieve a clean cut. Crop types and conditions influence the knife and forward
speeds.
Table 4.5 Knife Speed
Header Description
Knife Speed
Type
Size m (ft.)
Minimum
Maximum
rpm
9
spm
10
spm
Draper with
single knife
6.1 (20)
600
1200
700
1400
Draper with
single knife
7.6 (25)
600
1200
700
1400
Draper with
single knife
9.1 (30)
600
1200
700
1400
Draper with
single knife
10.7 (35)
550
1100
650
1300
Draper with
single knife
12.2 (40)
525
1050
600
1200
Draper with
double knife
4.6 (15)
750
1500
950
1900
Draper with
double knife
6.1 (20)
750
1500
950
1900
Draper with
double knife
7.6 (25)
700
1400
850
1700
Draper with
double knife
9.1 (30)
600
1200
800
1600
Draper with
double knife
10.7 (35)
600
1200
700
1400
When the header is first attached to the windrower, the Harvest Performance Tracker (HPT) receives a code from the
header that determines the knife speed range and the minimum speed.
The desired speed can be programmed and stored in the HPT so the knife will operate at the original set-point after the
header is detached and reattached to the windrower.
Refer to the header operator
’
s manual for the suggested knife speed for a variety of crops and conditions.
NOTE:
The knife speed cannot be programmed outside the range specified for each header.
Setting Knife Speed
Knife speed is displayed in strokes per minute (spm).
DANGER
Ensure that all bystanders have cleared the area.
9.
Revolutions per minute is the speed of knife drive box pulley
10. Strokes per minute of knife (rpm x 2)
Содержание M1170NT5
