MacDon M1170, Инструкции по разгрузке и сборке

Страница: 90 / 160

215981
82
Revision A
1033580
A
Figure 5.2: Header Float Springs
3. If the header lift legs will be lowered WITH a header or
weight box attached to the windrower
, proceed to Step 7,
page 83 .
If the header lift legs will be lowered WITHOUT a header
or weight box attached to the windrower
, fully release the
tension in header float springs (A):
•
If the Harvest Performance Tracker (HPT) displays a
message saying that the float should be removed, then
remove the float and proceed to Step
7, page 83 .
•
If the HPT does NOT display a message saying that the
float should be removed, then proceed to Step 4, page
82 to remove the float manually.
IMPORTANT:
To lower the header lift legs without a header or a weight
box attached to the windrower, ensure that the tension on
the float springs is fully released. This will prevent damage
to the header lift linkages.
1015851
A
B
Figure 5.3: HPT Display
4. Press HPT scroll knob (A) to highlight QuickMenu options.
5. Rotate HPT scroll knob (A) to highlight HEADER FLOAT
symbol (B) and press the scroll knob to select it.
1019607
A
Figure 5.4: HPT Display
6. On the FLOAT ADJUST PAGE, press soft key 3 (A) to disable
the float.
ATTACHING HEADERS TO WINDROWER