215981
23
Revision A
1022808
A
B
Figure 3.17: Slide Hammer
6.
Adjust the lifting device
’
s lift height until pin (A) is loose.
Use slide hammer (B) (MD #209816) to extract the pin from
the front of the frame.
NOTE:
Use of a special tool is necessary due to the limited amount
of space in front of the fuel tank.
NOTE:
Removing the pins will be difficult if the right leg is bearing
any of the wheel
’
s weight.
7.
Remove the second pin.
1022871
A
Figure 3.18: Right Leg Ready to Move
8.
Move the leg outward to expose hole (A) in the frame.
1022811
A
B
Figure 3.19: Leg Pin
9.
Align the holes at the pin locations. Use slide hammer (B) to
reinstall pins (A). If necessary, adjust the jack to prevent
damage to the outer edges of the pins.
