215981
46
Revision A
4.1.4
Checking and Adding Engine Oil
The engine oil level will need to be inspected before the engine can be operated. It may be necessary to add oil to the
crankcase.
Checking engine oil level
1022834
A
Figure 4.8: Engine Oil Dipstick Location
1.
Locate engine oil dipstick (A) on the right side of the
windrower. Turn the dipstick counterclockwise to unlock it.
Remove the dipstick.
2.
Wipe the dipstick clean. Reinsert the dipstick it into the
dipstick tube.
1000074
Figure 4.9: Engine Oil Level on Dipstick
3.
Remove the dipstick again. Check the oil level. The oil level
should be between the LOW (L) and HIGH (H) marks on the
dipstick. If the oil level is below the LOW mark, oil will need
to be added to the crankcase.
NOTE:
Adding 1.9 liters (2 U.S. quarts) of engine oil will raise the
level from LOW to HIGH.
4.
Replace the dipstick. Turn the dipstick clockwise to lock it.
Adding engine oil
1012638
A
Figure 4.10: Oil Filler Cap
5.
Clean the area around filler cap (A). Turn the cap
counterclockwise to unlock it. Remove the cap.
6.
Use a funnel to add oil to the crankcase. For information on
the oil specifications, refer to
IMPORTANT:
Do
NOT
overfill the crankcase with oil. Operating the
engine while it is overfilled with oil can damage the engine.
7.
Install oil filler cap (A). Turn the cap clockwise until it
is snug.
