169784
16
Revision H
1022257
A
Figure 3.2: Left Header Leg
2.
Apply grease to plastic bushings (A), and then install in each
side of leg from inside.
NOTE:
If bushings are hard to install, remove corrosion inhibitor
with petroleum-based solvent.
1011527
A
B
Figure 3.3: Front Axle Assembly Inside Left Header Leg
3.
Position front axle assembly (A) (MD #193003) inside
header leg and install L-pin (B) (MD #144415) to hold axle
in place.
1011524
A
B
C
C
Figure 3.4: Front Axle Assembly Inside Left Header Leg
4.
Pivot axle assembly (A) and install pivot pin (B)
(MD #144374) into leg from inboard side. Ensure plastic
bushings are not damaged when positioning axle assembly
and installing pivot pin.
5.
Install grease fittings (MD #18671) in leg tube at
location (C).
6.
Rotate pivot pin (B) to align holes in pin and axle assembly.
Содержание D65
