PRE-DELIVERY INSPECTION
Form # 169007
Model Year - 2009
26
I. LUBRICATE HEADER
Refer to the illustrations for lubrication points:
a. Wipe grease fitting with a clean cloth before
greasing, to avoid injecting dirt and grit.
b. Inject grease through fitting with grease gun
until grease overflows fitting, except where
noted.
c. Leave excess grease on fitting to keep out dirt.
d. Replace any loose or broken fittings
immediately.
e. If fitting will not take grease, remove and clean
thoroughly. Also clean lubricant passageway.
Replace fitting if necessary.
f. Use clean High Temp. Extreme Pressure
grease.
High Temp. Extreme Pressure
(EP2) Performance With 1%
Max Molybdenum Disulphide
(NLGI Grade 2).Lithium Base
D60
KNIFE DRIVE BEARING - DK
(BOTH SIDES)
KNIFE DRIVE SHAFT – DK
15 PUMPS MINIMUM
(BOTH SIDES)