MAINTENANCE/SERVICE
73
Upstop Adjustment
The upstops are located at the rear of the sprayer
attachment, behind the solution tank. When the
header lift cylinders are fully extended, the upstop
should be flush with the deck of the self-propelled
windrower. Adjust the upstops at the beginning of
the season and check the upstop adjustment every
time the sprayer is attached for field use.
To adjust the upstops:
1. Engage the header lift cylinder stops.
DANGER: To avoid bodily injury
from fall of raised header, always
engage header lift cylinder stops
when working on or around raised
sprayer.
2. Loosen the four bolts that secure each upstop.
3. Push the upstop up to the bottom edge of the
tractor deck. Secure each upstop by tightening
the four bolts.
Right Upstop
Left Upstop
