22
XDR SPECIFICATIONS
(Specs are a guide only and may change without notice)
Physical
Length
225mm (538mm with barrel)
Width
34mm
Height
205mm
Weight
890g with barrel and battery
Barrel Threads
Autococker
Performance
Operating pressure
100psi
Maximum Rate of Fire
25 BPS (only allowed with eyes on, and paint)
Electronics
Software
Militiasoft V1.xx
Hardware
XDR V1.2 (Lead Free)
Display
Single colour OLED, low power usage 128x32px
Power
LiPO 3.7V battery
Fire modes
Semi, NXL, PSP, Custom ramp, Full Auto
Connectivity
Mini USB
Solenoid
3V
.5W
MACDEV TECHNICAL
ASSISTANCE
If you require technical assistance,
please contact your local MacDev
service centre. You can also find
assistance on the MacDev support
website :
macdevpaintball.com/support
Symptom
Possible Cause
Solution
Your marker fires high on
the first shot or
inconsistently.
Creeping regulator
Clean and lubricate the reglulator, ensure that
the seat and piston are in good condition.
Your marker fires low on
the first shot
Sticking drivetrain
Clean and relubricate the drivetrain. If you
continue to have problems:
-increase the dwell by 1-2 ms.
-increase the ABS parameter on your board.
