MACDEV Gladiator inLine REG, Руководство пользователя

Страница: 4 / 10

Step 4: Connect your air system to the air tting and use it to
blow air through your Gladiator bottom works
as shown in gure 4. This will clear out any
debris left over from the installation process
and avoid damage to your seals.
Step 5: re-assemble your gladiator.
Connecting the Gladiator to your marker
The Gladiator will be accepted into all standard ASA adaptor
threads. (for example: Cocker, LCD Angel, Tribal)
Step 1: Lubricate o-ring and ASA threads with good quality
silicon grease. DO NOT USE OIL.
Step 2: Screw Gladiator into ASA thread. Making sure that
the placement of the velocity adjusting screw (on side) is
accessible with an allen wrench.
Step3: Connect your air system to the tting in the bottom
of your Gladiator.
Step 4: Turn on air to the Gladiator reg. Wind the adjustment
screw clockwise to increase velocity and anti-clockwise to
decrease velocity. NOTE: always chronograph your marker
after adjusting your regulator. Never chrono over 300fps.
Step 5: Put on your goggles, scream out “WHO’S YOUR
DADDY?” and run onto the eld.
Figure 4