macc NTM 315, Инструкция по эксплуатации

Страница: 23 / 62

Emacc800
User’s manual
ELETTRONICA
ELCO
Contents
The instructions contained in this manual should be followed scrupulously.
In case of doubt contact the manufacturer:
1. CONTENTS Page 1
2. FRONT PANEL Page 2
3. CONNECTIONS Page 2
4. SOFTWARE OPERATION Page 4
MACHINE START-UP AND RESET Page 4
SEMIAUTOMATIC CUTTING CYCLE Page 4
FAST BLADE DOWNSTROKE Page 4
MANUAL CUTTING CYCLE Page 4
LIST OF EMERGENCIES Page 4
ELCO ELETTRONICA
Via della Costituzione, 50
42015 Correggio - (R.E.)
ITALIA
PRODUCT CONFIGURATION
SOFTWARE INSTALLED ECPICAA0 version 2107
HARDWARE CONFIGURATION:
7 digital inputs 24V ac (5 for emergency signals)
10 outputs with free contact
The product is provided with a front panel having degree of protection IP65
Page 1