macc NTM 315, Инструкция по эксплуатации

Страница: 27 / 62

Emacc800
User’s manual
ELETTRONICA
ELCO
6. BLADE DOWNSTROKE AS FAR AS THE LIMIT SWITCH
7. BLADE UPSTROKE AS FAR AS THE LIMIT SWITCH
8. BLADE ROTATION STOP
9. VICE OPENING
10. COOLANT STOP
FAST BLADE DOWNSTROKE (OPTIONAL)
The fast blade downstroke function is activated using the “arrow down” key below the coolant key – the bow will lower
faster.
MANUAL CUTTING CYCLE (OPTIONAL)
After the handle is pressed, the machine can be used in manual mode.
In this mode, it is also possible to reserve coolant control.
In this environment, if the coolant key is kept pressed for 3 seconds, the machine washing function is enabled.
Return to the semiautomatic cycle by means of the reset key.
LIST OF EMERGENCIES
Each type of emergency corresponds to one of the 6 red leds present on the panel:
1. BLADE BROKEN (LED 1 + LED 3)
2. GUARD OPEN (LED 2 + LED 3)
3. BLADE-HIGH AND BLADE-LOW LIMIT SWITCHES PRESSED SIMULTANEOUSLY (LED 3)
4. EMERGENCY BUTTON PRESSED (LED 4 + LED 3)
5. THERMAL PROTECTION 1 (LED 5 + LED 3)
6. THERMAL PROTECTION 2 (LED 6 + LED 3)
When an emergency is triggered, the corresponding led is activated and all the outputs are deactivated.
The led remains fixed as long as the emergency remains enabled.
When the emergency control is reset, the emergency led is switched off, and the reset key must be pressed.
Page 5