1
GENERAL INSTRUCTIONS
1-1
Before starting up the appliance, carefully read the following instructions.
1-2
The machine is designed for professionals and must be used only by
skilled personnel.
1-3
Keep the appliance well clear of water jets, damp areas and heat sources.
1-4
NEVER UNDER ANY CIRCUMSTANCES PLACE YOUR HANDS IN THE
BLENDER CUP WHEN IT IS FITTED ON THE APPLIANCE BODY.
1-5
NEVER FIT THE BLENDER CUP BASE ON THE APPLIANCE BODY.
1-6
Never use ice cubes or frozen fruit. (excluding the PA10 range)
1-7
Always consult a qualified electrician for repairs and maintenance.
2
DESCRIPTION OF APPLIANCE (Fig. 1)
A)
Inspection plug
B)
Cover
C)
Containers: Plastic (P100 range)
Stainless steel (ranges P102 - P103 - P105 - PA10)
D)
Container gasket
E)
Knife support
F)
Container base
G)
Machine body
H)
Switch (fig. 4)
I)
Mixer support (fig. 3)
3
INSTALLATION
3-1
Installation must be carried out in strict compliance with the provisions of
law currently in force in the country of use, with particular reference to
said
country's accident and fire-prevention requirements and electricity
authority regulations.
3-2
Before connecting the appliance to the mains supply, make sure that the volt-
age indicated on the data plate is commensurate with that of the mains supply.
3-3
Carefully clean all the components (see point 5).
3-4
Make sure the switch is set to "0".
3-5
Insert the plug in the power inlet.
3-6
Tampering with the appliance or failure to comply with the relative connec-
tion requirements causes undue danger and consequently renders the
manufacturer's guarantee null and void.
4
OPERATION
4-1
Insert the cup with cover into the machine body (filled to a maximum of 2/3 capac-
ity), aligning the magnetic support with the rod (Fig. 2), and put the switch in posi-
tion "1" or "2" (P105 position "1"). For the mixer with continuos variable speeds
(P100V - P102V - P103V - PA10V), turn on the machine by rotating the switch
clockwise and increasing the speed gradually to the required setting.
4-2
In the electric mixer from the PA10 range, before activating the switch or the
speed regulator, press the round button several times for one or two seconds.
3
ENGLISH
