31
MSPS1200 by MACAllister
Product functions
6. Hold the saw firmly with both hands, press the plunge lock button (1) and the
ON/OFF switch (2).
7. Allow the blade to reach full speed, then pivot the saw forward to plunge the
blade into the workpiece to the set depth.
During first use the rubber lip is sawn off and thus splitter protection is
guaranteed up to the saw blade.
8. Push the saw forward along the track to engage the blade with the workpiece
and start the cut.
9. Maintain a consistent feed rate - too fast may put excessive strain on the motor.
Avoid any sudden movements of the saw.
10. Make your cut, again using the cutting width indicators as a guide to when to
raise the saw from the workpiece.
11. After completing the cut, release the ON/OFF switch and allow the blade to
come to a complete stop before removing the saw from the track.
1
2
Fig.23
With the track(0-48
。
)
IMPORTANT: When making bevel cuts it is essential to lock the saw in the track.
For a bevel cut, lock the saw to the track by rotating the track lock (9) to the ‘I’
position and set the anti-kickback knob (8) to the ‘I’ position.
In
m
ore d
etai
l...
Содержание MSPS1200
Страница 42: ......