MacAllister MSPS1200, Давайте начнем

Страница: 13 / 42

13
MSPS1200 by MACAllister
Before you start
Unpack
Carefully unpack and inspect your tool. Familiarize yourself with all its features and
functions.
Ensure that all parts of the tool are present and in good condition. If any parts are
missing or damaged, have such parts replaced before attempting to use this tool.
1x plunge saw
1x 5mm hex key
2x 700mm track
1x d
1x 3mm hex key
ust connector
2x carbon brush
Set cutting depth
The cutting depth can be set between 0-59 mm.
For best results, less than a full blade tooth should be visible below the workpiece.
1. Loosen the depth adjustment knob (14) and slide it to the desired cutting depth
according to the depth scale (16) to set the cutting depth. (Refer to Fig. 3)
NOTE :
The graduated values on the depth scale (16) apply for straight
cuts (90° cut). The guide rail track compensation (15) must be tilted up
when using the plunge saw without track. Only when using the plunge
saw with track, the track compensation is used to compensate for the
thickness of the track.
Get
ting
st
arted
...
Helping to minimise your vibration exposure risk. ALWAYS use sharp chisels, drills
and blades.
Maintain this tool in accordance with these instructions and keep well lubricated
(where appropriate).
Avoid using tools in temperatures of 10ºC or less. Plan your work schedule to
spread any high vibration tool use across a number of days.
Health surveillance
All employees should be part of an employer’s health surveillance scheme to
help identity any vibration related diseases at an early stage, prevent disease
progression and help employees stay in work.