25
MSDD18-Li-2
In
more
detail
. . .
Product functions
Automatic work light (Fig. 12)
The work light (1) will automatically illuminate by pressing
the ON/OFF switch (6).
WARNING!
Do not look directly into the light.
Two-speed gear control
The two-speed gear control (4) is used to switch between two working modes. When
the gear is set to position
1
, the speed will decrease and the drill will have greater power
and torque. When the gear is set to position
2
, the speed will increase and the drill will
have less power and torque (Fig. 13)
Gear
position
Description
1
Low speed range for screwdriving or working with large drilling
diameter
2
High speed range for working with small drilling diameter
Fig. 13
3
1
Fig. 12
