13
MSDD18-Li-2
Safety information
Getting
Started . . .
While working with this power tool, hand/arm vibrations occur.
Adopt the correct working practices in order to reduce the
exposure to vibration. This tool may cause hand-arm vibration
syndrome if its use is not adequately manag
ed.
Warning:
Identify safety measures to protect the operator that
are based on an estimation of exposure in the actual conditions
of use (taking account of all parts of the operating cycle such as
the times when the tool is switched off and when it is running
idle in addition to the trigger time).
Emergency
Familiarise yourself with the use of this product by means of this
instruction manual. Memorise the safety directions and follow
them to the letter. This will help to prevent risks and hazards.
>
Always be alert when using this product, so that you can
recognise and handle risks early.
Fast intervention can
prevent serious injury and damage to property.
>
Switch off and disconnect from the power supply if there
are malfunctions.
Have the product checked by a qualified
professional and repaired, if necessary, before you operate it again.
Residual risks
Even if you are operating this product in accordance
with all the safety requirements, potential risks of injury
and damage remain. The following dangers can arise in
connection with the structure and design of this product:
>Health defects resulting from vibration emission if the product
is being used over long periods of time or not adequately
managed and properly maintained.
>Injuries and damage to property due to broken cutting
attachments or the sudden impact of hidden objects during use.
>Danger of injury and property damage caused by flying objects.
