MAC BATTERY CHARGERS
1
Features
Microprocessor based control
Lightning/surge protection
Auto start/stop
Reverse polarity protection
LED charge mode indicators
AC Protection
SCR output control
DC Protection
Battery Type Select
Current limiting
UL, CUL, CE Available
Full Charge Sentry (Domestic)
Dual AC Input (Export)
50/60 HZ (Export)
2
Introduction
The MAC SCR series of battery chargers were designed especially for lead acid batteries used in
demanding deep cycle applications. Its overall simplicity, method of operation and trouble-free
performance makes the SCR charger attractive to every type of equipment user. To operate, after
the charger is connected to AC power, the user simply plugs the DC cord into the battery to activate
the unit. That's all there is to it. The charger not only immediately starts charging the battery, but
also monitors the battery condition determining the proper charge requirements and the correct
finish before automatically terminating the charge when the battery is fully charged.
3
Installation
Initial Installation
!
CAUTION:
To reduce the risk of fire and to ensure proper operation, this charger should be used
only on dedicated circuits provided with a minimum of 15 to 20 amps per charger, depending on the
charger data plate requirements, and should be protected by proper circuit breakers or fuses, in
accordance with National Electrical Code, ANSI/NFPA 70, and all local codes and ordinances.
