Model LFMR6
Installation, Operation, and Maintenance
File: LFMR6-IOM.doc
6
Rev:
2/22/08
Operating Instructions
NOTE:
After reviewing these instructions and all decals,
get familiar with lift controls by running the lift
through a few cycles before loading vehicle on lift.
Loading Vehicle
1. Be sure lift is fully lowered and service bay is
clear of all personnel before the vehicle is
driven on to lift.
2. Position vehicle over lift having equal distance
from front tire to end of front ramps and rear
tire to end of rear ramps. Vehicle must also be
centered side to side.
WARNING
Lift is designed to raise complete
vehicle.
NEVER
use to raise just one end or
Side of vehicle.
NOTE:
Some vehicles may have the manufacturer’s
recommended lift points identified by triangle
shape marks located on its undercarriage. Also,
there may be a label located on the right front door
lock face showing specific vehicle lift points. If the
vehicles lift points are not identified, refer to the
service garage lift points shown in Fig. 1.
ALWAYS
follow the operating instructions supplied
with the lift.
Ladder
Unitized
Perimeter
Stub
Fig 1 Service Garage Lift Points
