5
The X-Dreamer can be flown with all types of paragliders unless the manufacturer
of your paraglider requires a specific harness to be used with his paraglider. Please
refer to the manual of your paraglider to find out if this might be the case.
The harness is serial delivered with two self-locking carabiners. These are placed on
red support loops. The paraglider risers are attached without twisting to the harness
using the self-locking .
Leg and chest straps are integrated into 2 buckle closing system. The pilot has just to
fasten left and right buckles. The overall geometry of the harness enables the pilot to
feel the feedback from the glider sensitively, whilst retaining a secure feeling in flight.
This increases the precision of turns while thermaling and aids active flying. On long
flights, the comfort of the X-Dreamer is second to none. A well-designed back pocket
system enables easy assembly of the harness and packing in a rucksack.
The X-Dreamer is available in four sizes (S, M, L and XL) that fit to pilot`s height
starting from 155 cm up to 200 cm. Volume space for the rescue: 10,0 dm
3
Harness weight: starts on 4.30 kg (S size complete with X-DREAMER foam protectors,
carabiners, 2 step speed system).
The X-Dreamer harness was load tested to 15 g of max. weight 120 kg.
The bottom rescue container is designed to enable a fast and easy deployment of the
parachute. The bottom position is ideal because the weight of the rescue stays near
the centre of gravity and therefore provides you with the most balanced comfort and
feeling in flight. The speed system works through pulleys and tubes that help to greatly
reduce friction when using the speedbar, it also reduces wear when used often and
reduces pilot fatigue during long flights.
shoulder straps
main chest strap
Cobra buckles
speed bar
side strap
angle of seat
main carabiner
chest strap with whistle
seat plate
leg straps
