Instruction Manual
MAN-040
7
www.macmedical.com
Unpacking and Inspection Instructions
CAUTION: The Endoscope Cabinet is heavy, and it is recommended that at least two
people assist with the unpacking.
Inspection
1. Receiving area must meet all State and Local regulations prior to unpacking.
2. Customer must inspect skid and Cabinet both before and after unpacking to determine if any items were
damaged during shipping. If the skid or Cabinet appear damaged in any way, contact the shipping
company immediately. Save all damaged packing material.
3. All damaged items must be listed on the Bill of Lading.
4. Customer is responsible for the proper disposal of all packing materials. The disposal of these items must
meet all State and Local regulations.
Unpacking the Endoscope Cabinet
Stainless steel Endoscope Cabinets are shipped on well-constructed wooden skids. Steel bands secure the
cabinet to the skid. The stainless steel surfaces of the part are protected by layers of plastic wrapping, and the
corners are protected by heavy cardboard.
IMPORTANT: Wear gloves and eyewear during the unpacking operation.
1. Use tin snips to cut the metal bands holding the box to the wooden skid.
2. Remove the cardboard corner protectors.
3. Remove the plastic protective wrapping.
Carefully inspect the Endoscope Cabinet while unpacking. If it appears damaged or defective in any way, call
your MAC Medical representative.
Retain all shipping materials until the cabinet is completely unpacked and inspected for damage.
Caution!
Do not use a box cutter or any other cutting utensil to remove the plastic wrapping
around the cabinet. These items can scratch the protective coating on the stainless steel, allowing
the surface to rust.