Instruction Manual
MAN-045
5
www.macmedical.com
Using a 5/8” Socket Wrench, unscrew
the Bolt from the bottom of the
Lower IV Pole using a leftward/
counterclockwise twist (Fig. 2).
Remove the Bolt and Washer from the
bottom of the Lower IV Pole (Fig. 3).
Place the Washer on the Bolt. Push the Washer and
Bolt assembly through the hole in the center of the
Wheeled Base from the bottom so that the threads
of the bolt protrude through the top of the Wheeled
Base. Position the bottom of the Lower IV pole over the
bolt where it protrudes from the Wheeled Base (Fig. 4).
Using the 5/8” Socket Wrench, tighten the
bolt onto the Lower IV Pole using a rightward/
clockwise twist. Make sure the bolt is tightened
securely (Fig. 5).
Bolt
Fig. 2: Unscrew Bolt
Lower IV Pole
Washer
Bolt
Fig. 3: Remove Bolt and Washer
Fig. 4: Assemble Bolt, Washer, Base and Pole
Fig. 5: Tighten Bottom Bolt
