Instruction Manual
MAN-009
7
www.macmedical.com
Installation
1. Check water supply and waste terminal locations -
A. Be sure all connections are safely accessible to the sink and in proper working condition. NOTE: For
proper sink operation the hot water temperature must be 120 degree F.
B. Install sink near a hot water source.
2. Infrared sensor activated sinks will also need to be near a 110/120V outlet power source.
3. Attach wall mount sink support brackets -
A.
Attach the “Z” bracket(s) to the wall. Recommended mounting specifications shown on page 8,
page 9 and page 10.
B.
IMPORTANT:
For wall mounted units, the wall structure must be capable of supporting the load.
4. Install the soap spout on the sink (See page 11).
5. Mount the sink body to the Z Brackets attached to the wall -
A. With the help of an assistant, slide the sink over the “Z” bracket(s) until it locks securely into place (Fig.
5 - Fig. 6, Z brackets shown in green).
6. Connect the drain pipe to the drain
7. Connect the water supply to the plumbing and set the temperature on the mixing valve (page 13).
Fig. 5: Cross section showing Z brackets locations
Fig. 6: Z brackets on sink
